PRODUCT CENTER

Index|Procuct Center

Recommended configuration for aluminum alloy welding: universal type

Features

·The robot moves smoothly, with the end speed consistent with the set welding speed, ensuring smooth welding and good forming;
·The robot and welding machine achieve fully digital communication control, which can achieve the best welding efficiency and welding effect;
·Welding parameters can be set on the robot, or different welding process conditions such as duty cycle, frequency, etc. can be required for different plate thicknesses of the same workpiece, which can be achieved by calling different JOB numbers through the robot.
·500A water-cooled hollow support for long-term double pulse welding;
·Single/Double Pulse Digital Welding Machine
·Maintain stable current output even with constant melting depth and changes in dry elongation;
·Smooth short-circuit transition, uniform weld bead, and beautiful forming;
·Short arc technology, faster welding speed;
·High frequency pulsating energy control, deeper melting depth, and more beautiful fish scales;
·Low heat input;
·Wire feeding with encoder feedback is more stable and has strong anti-interference ability;
·Upgradeable expert database;
·Push wire drawing welding gun interface controls the push wire drawing welding gun, making wire feeding more stable with less arc fluctuation


Consultation Hotline:
180 2810 2016
Consult Now

Detailed Description

Scope of Application

  • Welding of 2.5mm~14.0mm aluminum or aluminum alloy

System Configuration

Already includes:
  • ● Body: CRP-RH14-10-W
    ● Electrical cabinet: G4 Rh14
    ● Welding machine: Artsen Plus 400QR (Megmeet)

  • ● German TBI push-pull welding gun (including TBI anti-collision)
    ● Including water tank, water pipe, and water pipe reel accessories
    ● Teaching pendant
    ● Operation box: 2 pieces
    ● Wire feeder, wire feeding tube, welding wire reel, welding cable
    ● The interconnection line between the electrical cabinet and the main body is 5 meters long
    ● 8 1.2A conductive nozzles
    ● One set of 1.2/1.6mm U-shaped wire feeding wheels each
Notes:
  1. ● The wire feeding for aluminum welding is crucial, and PTFE or graphite tubes need to be used throughout the entire process from the wire spool to the gun head;
    ● The wire feeding wheel and conductive nozzle need to use aluminum welding special accessories;
    ● Aluminum welding requires high welding process requirements

configuration parameters

  • CRP-RH14-10-W Welding Robot

    View parameters

  • G4 Industrial Robot Control Cabinet

    View parameters

  • Artsen Plus 400QR Welding Machine

    View parameters

  • Other attachment parameters

    welding torch 500A water-cooled gun, 100% temporary load rate
    Welding gun angle Gooseneck 22 °
    anti-collision Reply accuracy 0.1mm
    Length of wire feeding tube 1.8 meters
    Positive electrode welding cable 3meters(50mm²/70mm²)
    Negative welding cable 3meters(50mm²/70mm²)
    Wire feeder control cable 5meters
    operation box Including emergency stop, start, pause, and enable, with a wire length of 5 meters and standard configuration of 2
    Interconnection line between electrical cabinet and main body 5meters